Description

Aero Tech Women's Motivate Safety Yellow Trim Fit Bike Fierce Jersey

The Women's Motivate Cycling Jersey was design and developed to create excitement and desire to jump on the bike by reminding you all the great things about cycling. The Women’s Motivate Cycling Jersey is printed with a high visibility, safety yellow coloring onto a performance fabric specially developed to hold color for a high-quality jersey with a great design that won't fade from washing or the sun. The design of the bike jersey is various bike themed elements on a hi-viz base with black side panels and sleeves for a slimming look. The Main Body Fabric is a textured, sun protection polyester fabric and the Side Panels and cuffs are a breathable, stretchable polyester.

The Motivate Jersey also comes with a full YKK separating zipper, 3 rear storage pocket, and 3M reflective trim for an added safety element in low light situations. The Women's Jersey was designed, developed, and manufactured in the USA at our sewing facility in Pittsburgh, PA. The trim fitting jersey is available in sizes X-Small to XX-Large.

Features:

Women's Trim Cut - Tight Aerodynamic Fit
AeroCool Polyester Fabric
Tech-Mesh Side Panel and Cuff Material
Full YKK Separating Zipper
Slicone Bottom Helm Gripper
Three Rear Storage Pockets
3M Reflective Safety Tab under Pockets
Sizes: X-Small to XX-Large
Factory Direct Value - No Retailer Price Mark-up
Made in the USA


Size	Women's Size	Chest (inches)	Waist (inches)	Hip (inches)
X-Small	2	30-32	24	35
Small	4-6	33-34	25-26	36-37
Medium	8-10	34-38	27-28	38-39
Large	12	38-40	29-30	40-41
X-Large	14-16	40-42	31-32	42-43
XX-Large	18-20	42-44	36-38	45-48

Photos and Additional Information

Women's Motivate Fierce Cycling Jersey Front Features

Women's Motivate Fierce Cycling Jersey Back Features

Fabric Information: AeroCool

AeroCool™ is a wearable tech fabric that manages moisture away from the skin and through the clothing for evaporation. Moisture management is one of the key performance criteria in today’s apparel. Moisture management is the process of transporting moisture away from the skin to the garments outer surface Moisture management often refers to the transport of both moisture vapor & liquid away from the body. Wetting and then Wicking is the nature of a technically designed fabric. In the heat summer and athletics, trapped sweat can heat up the body and lead to fatigue or diminished performance. When wearing a garment manufactured with AeroCool™ , the moisture vapor can pass through openings between filters of yarns. The polyester fibers are extruded in an angular shape and then knitted into a highly technical two stage fabric surface. The technical composition of fiber, fiber shape and knitting process all support the maintenance of body temperature.

When the body temperature heats up, sweat is produced. With a cotton garment, the sweat leads to "wetness" and increases clothing weight - especially in sweat prone areas like the neckline and arm pits. This wet is perceived as uncomfortable and with a negative effect on performance. Moisture management with AeroCool™ leads to temperature control and enhanced comfort. Keeping cool with technical performance fabric means moisture management. Temperature control can be achieved by evaporation of water on the skin's surface.

The wicking of moisture gives wearer a dry feeling by spreading the liquid to evaporate easily. Hydrophilic fibers like cotton are attracted to and bind with water, meaning the moisture is retained with poor moisture release. Hydrophobic fibers are synthetic like polyester or nylon. These fibers do not hold moisture and depending on their shape, their surface area and their small gaps in construction, the surface has few bonding sites for water to bind. This means the fabric stays dry and has good moisture transportation and evaporation (wicking). Micro-fibers are key to the construction of AeroCool™ fabrics because of the fine fiber size and the knitted construction which contains small gaps and big surface areas for evaporation of moisture.